# How to assemble IKEA BRIMNES wardrobe with 3 doors > BRIMNES wardrobe with 3 doors, white, 46x193/4x743/4" **Interactive guide**: [Open the full step-by-step guide on howtoassemble.it](https://howtoassemble.it/step-by-step/ikea/brimnes-wardrobe-with-3-doors-90574800) to follow along with zoomable instruction images, progress tracking, and assembly checklists. **Video tutorial**: This guide includes a synced video walkthrough. [Open the guide](https://howtoassemble.it/step-by-step/ikea/brimnes-wardrobe-with-3-doors-90574800) to watch the video side-by-side with each step. ![BRIMNES wardrobe with 3 doors](https://steps.howtoassemble.it/data/ikea/90574800/product.webp) ## BRIMNES Wardrobe with 3 doors ### Materials needed | Part | Quantity | |------|----------| | Screw (109567) | 2 | | Plastic Wall Plug (10087223) | 2 | | Small Screw (109049) | 2 | | Washer (100823) | 4 | | Wall Bracket (106989) | 2 | | Screw (100214) | 4 | | Cam Screw (118331) | 14 | | Small Screw (109567) | 6 | | Small Screw (109049) | 3 | | Wood Dowel (101345) | 22 | | Cam Lock (119250) | 14 | | Cam Lock (119251) | 14 | | Cam Lock (119252) | 14 | | Short Screw (105248) | 49 | | Nail (101293) | 60 | | Plastic Clip (105494) | 1 | | Threaded Insert (123840) | 3 | | Threaded Insert (109837) | 3 | | Threaded Insert (1012196) | 3 | | Handle (153548) | 8 | | Handle (158568) | 8 | | Mounting Plate (10038685) | 2 | | Angle Bracket (102553) | 3 | | Pin (101532) | 12 | | Adhesive Pad (107091) | 2 | | Hex Key (100001) | 1 | | U-shaped Bracket (10121089) | 2 | | Hinge Assembly (109336) | 9 | | Adjustment Plate (109220) | 9 | | Long Angled Rail (10121200) | 3 | | Round Rod (10121128) | 1 | ### Steps > ℹ️ General anti-tipover safety warning panel with hazard icons and multilingual instructions (English, French, Spanish) about securing furniture, avoiding TV placement, preventing climbing, limiting open drawers, and placing heavy items low. > ℹ️ Preparation and tool guidance panel showing required tools, correct drill bit sizes for different wall materials, and wall anchoring examples. > ℹ️ Hardware-bag and load guidance panel indicating wall-fixing hardware and that assembly/load support depends on proper wall attachment. > ℹ️ Safety behavior panel showing correct/incorrect handling with a screwdriver and crossed-out unsafe practice. **Step 1:** The panel is laid on a soft surface and two cam screws (118331) are inserted into the marked holes with correct edge orientation, with a close-up showing screw direction and a crossed-out incorrect side. ![Step 1](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-01.png) **Step 2:** Insert two 101345 wooden dowels into the base panel holes and position the vertical panel onto the base in the correct orientation, as indicated by the do/don't inset. ![Step 2](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-02.png) **Step 3:** Install and tighten two cam-lock fasteners (119250/119251/119252) from the side to secure the vertical panel to the base panel. ![Step 3](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-03.png) **Step 4:** The frame assembly is rotated and two wooden dowels (101345) are inserted into the side panel holes. ![Step 4](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-04.png) **Step 5:** Two screws (100214) are driven into the side panel using the included hex key to secure the assembly. ![Step 5](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-05.png) **Step 6:** The user identifies board orientation with corner close-ups and installs three 109220 bracket plates on each of two long panels using 105248 screws tightened with a screwdriver. ![Step 6](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-06.png) **Step 7:** Eight cam screws (118331) are inserted and tightened into the predrilled holes on the long and short panels, as shown in the zoomed detail. ![Step 7](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-07.png) **Step 8:** The side and divider panels are aligned onto the long panel and six wooden dowels (101345) are inserted at the indicated joints, as shown in the zoom callout. ![Step 8](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-08.png) **Step 9:** A large panel is brought into position and connected to the partially assembled frame to continue forming the cabinet body. ![Step 9](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-09.png) **Step 10:** The cabinet frame is assembled and four cam locks are inserted and tightened using a screwdriver, as shown in the two zoom callouts. ![Step 10](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-10.png) **Step 11:** Attach two angle brackets to both ends of the long rail using two screws per bracket, as shown in the zoom inset. ![Step 11](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-11.png) **Step 12:** Slide two end caps onto the protruding pins at the rail ends and press them into place, as shown in the zoom inset. ![Step 12](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-12.png) **Step 13:** The side and internal panels are aligned and connected at the front corner using two screws (105248) in the shown bracketed joint. ![Step 13](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-13.png) **Step 14:** Two long rails are prepared by inserting six dowels (101345) into the predrilled end and side holes as indicated in the zoom callout. ![Step 14](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-14.png) **Step 15:** The front rail is slid into place on the side/front panel assembly, with inset guidance showing correct dowel alignment and forbidden orientation. ![Step 15](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-15.png) **Step 16:** Two people position and rotate the large side panel onto the frame while sliding the front rail to engage and align the connections. ![Step 16](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-16.png) **Step 17:** The cam locks are inserted and turned to secure the upper side panel assembly, with a zoom callout showing the lock orientation and rotation. ![Step 17](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-17.png) **Step 18:** Two screws are driven into the front corner bracket to fasten the lower frame connection, as shown in the enlarged zoom detail. ![Step 18](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-18.png) **Step 19:** Attach three angle brackets to the front inside area using screw 105248 into bracket 102553 with a screwdriver. ![Step 19](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-19.png) **Step 20:** Fasten three screws 109049 vertically into the same bracket points and use only the approved screw type, not 109567. ![Step 20](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-20.png) **Step 21:** Six wooden dowels are inserted into the side panel and the panel is positioned onto the drawer-like frame assembly. ![Step 21](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-21.png) **Step 22:** Four cam screws are installed into the large bottom panel, with a close-up showing screw orientation and the board edge direction. ![Step 22](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-22.png) **Step 23:** Insert three 101239/1002840 studs into the board and tap them in with a hammer, as shown in the zoom callout. ![Step 23](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-23.png) **Step 24:** Place the prepared top panel onto the cabinet frame, aligning it with the side and inner divider panels. ![Step 24](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-24.png) **Step 25:** The builder inserts and turns four cam lock covers/fittings into the cabinet side holes using a flat screwdriver. ![Step 25](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-25.png) **Step 26:** The builder drives two long screws into the right side of the cabinet using the included hex key. ![Step 26](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-26.png) **Step 27:** The assembler inserts and taps in six side pegs/plugs at the marked front holes using a hammer. ![Step 27](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-27.png) **Step 28:** Two people rotate the assembled frame over together in the direction shown by the curved arrow. ![Step 28](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-28.png) **Step 29:** The panel is lowered onto the frame and aligned so the seam sits correctly, with callouts showing the correct placement and an incorrect offset position. ![Step 29](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-29.png) **Step 30:** Install one 105494 clip with pin 101293 into the top corner hole and press it fully into position at the cabinet edge as indicated. ![Step 30](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-30.png) **Step 31:** Install one 105494 clip with pin 101293 at the next top corner position and press it into the seam until seated. ![Step 31](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-31.png) **Step 32:** Press the panel joint into place and install one 101293 fastener at the indicated corner using part 105494. ![Step 32](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-32.png) **Step 33:** Install 35 of the 101293 fasteners with 105494 around the top perimeter of the unit. ![Step 33](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-33.png) **Step 34:** The assembler secures the back panel to the frame by hammering in part 101293 at two highlighted areas, 10 times each. ![Step 34](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-34.png) **Step 35:** Attach the two wall-fixing brackets with the specified washer and screw hardware, then lift and tilt the assembled unit upright with two people. ![Step 35](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-35.png) **Step 36:** The cabinet is secured to the wall at two top brackets using wall-appropriate fasteners, with zoom callouts showing to position the bracket, mark, pre-drill, and tighten the screw. ![Step 36](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-36.png) **Step 37:** The cabinet frame is shown upright and positioned against the wall, with arrows indicating it should be moved back into place. ![Step 37](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-37.png) **Step 39:** The cabinet frame is shown upright while two top mounting brackets are secured using screws, with a zoomed inset indicating the screw orientation and tightening direction. ![Step 39](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-39.png) **Step 40:** The bracket plates are positioned in the cabinet and secured with screws in three locations, with a zoom inset showing the plate orientation and tightening direction. ![Step 40](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-40.png) **Step 41:** Nine screws are tightened into the mounting plates on the laid-out door panels, with a zoom inset showing screwdriver rotation and fastener placement. ![Step 41](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-41.png) **Step 42:** The door is aligned to the hinge plates and secured by tightening the hinge screws, repeated for a total of 9 hinge fixings. ![Step 42](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-42.png) **Step 43:** The handles are fastened onto the cabinet doors using four screws, with two handle placements indicated for two door variants. ![Step 43](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-43.png) **Step 44:** The shelf is inserted into the cabinet and secured using four 101532 pins, with zoom callouts showing the pin part and insertion direction. ![Step 44](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-44.png) **Step 45:** The installer positions and secures the top sliding-door guide hardware with screws, then seats the door downward into the guide as shown in the enlarged callouts. ![Step 45](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-45.png) **Step 46:** Insert four shelf support pins (101532) into the cabinet side holes and place two shelves onto the supports at the indicated heights. ![Step 46](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-46.png) **Step 47:** Attach three adhesive bumper pads (part 107091) to the indicated inner side area of the cabinet doors, as shown in the zoom callout. ![Step 47](https://steps.howtoassemble.it/data/ikea/90574800/brimnes-wardrobe-with-3-doors-white/images/steps/step-47.png) > ℹ️ Standalone circled-info panel shows three door hinge adjustment procedures: vertical adjustment, depth/lateral adjustment, and fine alignment using hinge screws with directional arrows. 📄 [Official PDF instructions](https://www.ikea.com/us/en/assembly_instructions/brimnes-wardrobe-with-3-doors-white__AA-2395783-4-100.pdf) --- Assembling the IKEA BRIMNES wardrobe with 3 doors is easy when you follow these instructions step by step. Each step includes a clear image and description so anyone can do it — no experience needed. For the best experience, [open the interactive guide on howtoassemble.it](https://howtoassemble.it/step-by-step/ikea/brimnes-wardrobe-with-3-doors-90574800) where you can zoom into diagrams, track your progress, and watch the synced video tutorial. Source: [howtoassemble.it](https://howtoassemble.it/step-by-step/ikea/brimnes-wardrobe-with-3-doors-90574800)