# How to assemble IKEA HEMNES 6-drawer dresser > HEMNES 6-drawer dresser, white stain, 421/2x515/8" **Interactive guide**: [Open the full step-by-step guide on howtoassemble.it](https://howtoassemble.it/step-by-step/ikea/hemnes-6-drawer-dresser-00576196) to follow along with zoomable instruction images, progress tracking, and assembly checklists. **Video tutorial**: This guide includes a synced video walkthrough. [Open the guide](https://howtoassemble.it/step-by-step/ikea/hemnes-6-drawer-dresser-00576196) to watch the video side-by-side with each step. ![HEMNES 6-drawer dresser](https://steps.howtoassemble.it/data/ikea/00576196/product.webp) ## HEMNES 6-drawer dresser ### Materials needed | Part | Quantity | |------|----------| | Screw (109567) | 2 | | Wall Anchor (10087223) | 2 | | Small Screw (109049) | 2 | | Washer (100823) | 4 | | Mounting Bracket (106989) | 2 | ### Steps > ℹ️ Full-width anti-tip safety warning panel with hazard and prohibition icons plus English, French, and Spanish instructions to secure furniture and prevent tip-over injuries. > ℹ️ Tool and wall-type preparation panel showing required hand tools, drill bits, and correct anchors/screws for masonry, concrete, and wood walls. > ℹ️ Hardware bag and wall-securing reminder panel indicating anti-tip fastening hardware and securing the unit to the wall. > ℹ️ Safety panel showing two-person assembly required and prohibiting one-person assembly. > ℹ️ Parts-bag panel 1 shows required hardware set with item IDs and quantities for bag 1. > ℹ️ Parts-bag panel 2 shows required hardware and tools with item IDs and quantities for bag 2. > ℹ️ Parts-bag reference panel labeled 3 showing hardware items with quantities: 117615 (12x), 101345 (20x), 119976 (12x), 110519 (26x), 123492 (24x), 110630 (24x), 1008579 (24x), and 105344 (8x). > ℹ️ Standalone parts reference area showing larger components and quantities: 10085261 (5x), 191064/191065 (4x), 10100257 (1x), and 10054446 (4x). **Step 1:** The four long rails are laid out in orientation L1, L2, R2, and R1, then 12 cam screws (118331) are installed with a screwdriver while following the shown face-direction and insertion-depth warnings, with hardware taken from bag 1. ![Step 1](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-01.png) **Step 2:** Two side rails are aligned and slid onto each panel edge with eight 101350 dowels inserted, while an inset note indicates to use dowel 101350 and not 101353. ![Step 2](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-02.png) **Step 3:** Twelve cam locks 110630 are inserted into the predrilled holes on the two assembled panel units and tightened as shown in the circular callouts. ![Step 3](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-03.png) **Step 4:** The installer inserts eight wooden dowels (101353) into the indicated holes and slides the long center rails in the arrow direction on both mirrored panel assemblies, then engages the small latch clips as shown in the zoomed inset. ![Step 4](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-04.png) **Step 5:** The panel labeled IKEA CR is assembled by fastening five crossbars with ten screws 107716, with hardware-type exclusions shown in the inline screw comparison box and a zoomed wheel-bracket screw detail. ![Step 5](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-05.png) **Step 6:** The panel labeled IKEA CL is assembled similarly by fastening five crossbars with ten screws 107716, shown with a zoomed wheel-bracket screw detail and inline screw comparison box, while the completed opposite panel is shown alongside. ![Step 6](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-06.png) **Step 7:** The installer presses two cover pieces (part numbers 191064/191065) onto the open rail ends on both frame assemblies, two per side. ![Step 7](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-07.png) **Step 8:** Fourteen cam screws (118331) are inserted upright into the marked holes across both frame assemblies, with the inset indicating correct insertion orientation. ![Step 8](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-08.png) **Step 9:** The installer inserts fourteen wooden dowels (101350) into the predrilled holes of the long rails and panel parts, as indicated by the hardware bag callout and zoom detail. ![Step 9](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-09.png) **Step 10:** The two panel assemblies are positioned side by side and a long upright piece is oriented and pressed downward onto the exposed dowels at the right side. ![Step 10](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-10.png) **Step 11:** The frame is laid on its side and multiple upright posts are inserted downward into the predrilled positions along the side rail. ![Step 11](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-11.png) **Step 12:** An additional upright post is lowered into the remaining slot so all vertical posts are installed along the rail. ![Step 12](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-12.png) **Step 13:** The frame is assembled with upright side posts and cam locks, then the cams are tightened with a screwdriver as shown in the zoom callout. ![Step 13](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-13.png) **Step 14:** One tall side panel is positioned upright onto the frame and aligned with the predrilled holes. ![Step 14](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-14.png) **Step 15:** The side panel is secured to the frame with one cam lock, then tightened as shown in the two zoom callouts. ![Step 15](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-15.png) **Step 16:** The side and inner vertical panels are positioned upright on the base frame and aligned beneath the top panel with hardware points indicated. ![Step 16](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-16.png) **Step 17:** Seven cam locks (110630) are inserted and tightened with a screwdriver along the upper rail and panel connections, as shown in the zoom callouts. ![Step 17](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-17.png) **Step 18:** Insert one 101350 wooden dowel into the top hole of the side panel, as shown in the zoomed callout. ![Step 18](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-18.png) **Step 19:** The frame is turned and two different threaded inserts are installed in the indicated top and lower positions using the hex key, with callouts showing which insert type is correct for each location. ![Step 19](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-19.png) **Step 20:** Insert six wooden dowels (101350) into the top holes of the frame, as indicated by the zoom callout. ![Step 20](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-20.png) **Step 21:** The installer positions two metal brackets on the panel edge and screws each bracket in place with a screw and washer set. ![Step 21](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-21.png) **Step 22:** The installer threads eight dowel bolts into the panel holes, with an inset showing the correct depth/orientation and a crossed-out incorrect example. ![Step 22](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-22.png) **Step 23:** The top panel is lowered onto the cabinet frame and aligned with the upper side structures. ![Step 23](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-23.png) **Step 24:** Four screws (100214) are tightened with the hex key (100001) to secure the top panel to the frame, as shown in the zoom callout. ![Step 24](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-24.png) **Step 25:** The frame assembly is shown while eight cam locks (110630) are inserted and tightened with a screwdriver, with zoom callouts indicating placement and turning direction. ![Step 25](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-25.png) **Step 26:** The frame is turned and the large panel is slid into position on top of the structure. ![Step 26](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-26.png) **Step 27:** Four fasteners are inserted through the top panel, as shown in the zoom callout for parts 144575 and 144574. ![Step 27](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-27.png) **Step 28:** Hammer one 101221 nail into each top corner while keeping equal distance (X=X) from the edge as shown in the two zoom callouts. ![Step 28](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-28.png) **Step 29:** The assembler hammers in 21 nails (part 101221) around the back panel perimeter while the unit is laid on its front, with a zoom callout showing nail placement at the panel edge. ![Step 29](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-29.png) **Step 30:** The assembler installs and tightens two top fasteners on the upper side rails using the shown fitting, then inserts and secures the side piece as indicated by the zoom callouts. ![Step 30](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-30.png) **Step 31:** The cabinet frame is shifted sideways in the direction of the arrow to its next position. ![Step 31](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-31.png) > ℹ️ Top information panel shows secure-it website QR guidance and a wall anchoring reminder icon. > ℹ️ Panel A shows instructions for solid wall type A: use Ø 5/16 in (8 mm) drill bit, mark depth, drill about 70 mm, and insert plug with a hammer. > ℹ️ Panel B shows instructions for hollow wall type B: use Ø 5/16 in (8 mm) drill bit, mark depth, drill about 30 mm, and insert plug with a hammer. > ℹ️ Panel C shows instructions for solid wood type C: use Ø 1/8 in (3 mm) drill bit, mark depth, and drill about 30 mm without wall plug. **Step 33:** Secure the anti-tip wall bracket to the wall and cabinet area using two screws, as shown in the zoomed inset. ![Step 33](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-33.png) **Step 34:** The user screws four cam bolts (123492) into a long panel using hardware bag 3. ![Step 34](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-34.png) **Step 35:** The user inserts two dowels (101345) into the side holes of the two long panels as shown in the zoom callout. ![Step 35](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-35.png) **Step 37:** Insert and lock four cam fittings into the side-panel assembly using the detailed cam-orientation callout. ![Step 37](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-37.png) **Step 38:** Lower the large back panel vertically into the base-and-side frame grooves. ![Step 38](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-38.png) **Step 39:** Position the top rail on the side panels and secure it with four nails as shown, using the hammer guidance in the zoom callout. ![Step 39](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-39.png) **Step 40:** Attach and secure the drawer slide wheel assemblies and screws on the drawer sides, with zoom callouts showing the wheel placement and screw fastening (4x). ![Step 40](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-40.png) **Step 41:** Screw in two long bolts and then press two round knobs onto the drawer side holes, as shown in the enlarged callout. ![Step 41](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-41.png) **Step 42:** Screw four cam bolts (123492) into the panel holes using a screwdriver. ![Step 42](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-42.png) **Step 43:** Screw four cam bolts (123492) into the panel holes using a screwdriver. ![Step 43](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-43.png) **Step 44:** Insert four ribbed dowels (101345) into the edge holes of the board pair. ![Step 44](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-44.png) **Step 45:** Insert four ribbed dowels (101345) into the edge holes of the board pair. ![Step 45](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-45.png) **Step 46:** Two side panels are lowered onto the bottom panel with dowels aligned and inserted. ![Step 46](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-46.png) **Step 47:** Two side panels are lowered onto the bottom panel with dowels aligned and inserted. ![Step 47](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-47.png) **Step 48:** Four cam locks are inserted and turned with a screwdriver to secure the side panels to the bottom panel. ![Step 48](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-48.png) **Step 49:** Four cam locks are inserted and turned with a screwdriver to secure the side panels to the bottom panel. ![Step 49](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-49.png) **Step 50:** The large panel is lowered straight down onto the left-side cabinet frame. ![Step 50](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-50.png) **Step 51:** The large panel is lowered straight down onto the right-side cabinet frame variant. ![Step 51](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-51.png) **Step 52:** The top board is positioned and fixed with four 110519 nails while tapping in remaining side fasteners with a hammer. ![Step 52](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-52.png) **Step 53:** The top board is positioned and fixed with six 110519 nails for the alternate frame configuration while tapping in side fasteners. ![Step 53](https://steps.howtoassemble.it/data/ikea/00576196/hemnes-6-drawer-dresser-white-stain/images/steps/step-53.png) 📄 [Official PDF instructions](https://www.ikea.com/us/en/assembly_instructions/hemnes-6-drawer-dresser-white-stain__AA-2406537-6-100.pdf) --- Assembling the IKEA HEMNES 6-drawer dresser is easy when you follow these instructions step by step. Each step includes a clear image and description so anyone can do it — no experience needed. For the best experience, [open the interactive guide on howtoassemble.it](https://howtoassemble.it/step-by-step/ikea/hemnes-6-drawer-dresser-00576196) where you can zoom into diagrams, track your progress, and watch the synced video tutorial. Source: [howtoassemble.it](https://howtoassemble.it/step-by-step/ikea/hemnes-6-drawer-dresser-00576196)